ALLNET Touch Display Tablet 5 Zoll PoE mit 2GB/16GB, RK3566

ALLNET PoE Injector Gigabit PoE & PoE+ (15,4W/30W) / plastic housing / "ALL0488v6   Highlights: PoE injector according to IEEE802.3af/at with max. power of 30W 2x RJ45 Gigabit Ports PoE Output 55VDC@30W Midspan PoE PIN's 4/5 (+) and 7/8(-) internal power supply unit compact design incl. 1.5m power cable with IEC-C5 to IEC-CEE7 protective contact cable NEW: Wall mounting capable Intelligent power supply via network without switch With the ALLNET ALL0488V6 Power over Ethernet Injector you can install your PoE-enabled IP devices such as WLAN access points, VoIP phones and much more absolutely independent of existing power sockets. For example, WLAN access points can be installed in the most ideal locations in a building without having to worry about power cabling. Switches that are not PoE-capable can be "retrofitted" with Power over Ethernet at a reasonable price, especially if only a few ports with PoE supply are required. Here, the ALL0488V6 saves the purchase of a PoE switch. The ALLNET ALL0488V6 supports the IEEE802.3af & IEEE802.3at standard with a maximum power of 30W Watt. The ALL0488V6 does not need to be configured. It has an RJ45 input socket and an RJ-45 output socket, which is used to connect the switch and terminal device to the PoE injector. The cable length here can be up to 100 meters between switch and terminal device in total, as is usual in Ethernet. Due to its compact design, the ALLNET ALL0488V6 can be installed very easy. It has an internal power supply and supplies the PoE voltage on pins 4/5 (+) and 7/8 (-). Technical Details: Element Specifikation Standards: IEEE802.3 10Base-T Ethernet IEEE802.3u 100Base-Tx Fast Ethernet IEEE802.3ab 1000Base-T Gigabit Ethernet Support terminal equipment with IEEE802.3af/at, PoE++ RoHS Compliance WEEE Compliance Ethernet Ports: 1x RJ45 10/100/1000 Mbps for connection to switch or hub 1x RJ45 10/100/1000 for connection to PoE end device PoE Output: PoE IEEE802.11af/at, Power pins: 4/5(+) 7/8(-) Power supply: 100 - 240VAC, internal power supply / Output: 55V/550mA incl. connection cable earth contact on IEC320-C5 "Kleeblat/Micky-Mouse" approx. 80cm length Power consumption: 30 Watt maximum with connected PoE end device AC Surge Protection: 1.0KV (5P/5N) L-N 1.2/50 (8/20) Tr/Th us 2.0KV (5P/5N) L-PE 1.2/50 (8/20) Tr/Th us N -PE Housing: Plastic housing Mounting: Wall-mounted Dimensions: length/width/height: 140 x 63 x 33 mm Environment: Operating Temperature: 0 ~ 40 °C Operating Humidity 10% ~ 90% (non-condensing) Storage Temperature: -20 ~ 90 °C Storage Humidity: 10% ~ 90% (non-condensing) EMI: FCC CFR47 Part 15 EN55024 EN55032 EMS: IEC61000-4-2(ESD) ± 6kV(contact), ±8kV(air) IEC61000-4-3(RS) 10V/m(80MHz~2GHz) IEC61000-4-4(EFT) Power Port: ±2kV; Data Port:±1kV IEC61000-4-5(Surge) Power Port:±1kV/DM, ±2kV/CM IEC61000-4-6(CS) 10V(150kHz~80MHz) Immunity: IEC60068-2-6(Vibration) IEC60068-2-27(Impact) IEC60068-2-32(Free Fall) Marks: CE; FCC

Highlights: support IEEE802.3, IEEE802.3u, IEEE802.ab,IEEE802.3af, IEEE802.3at and LT PoE 90W 1 Port 10/100/1000 Base-T (Data) for connection to a switch, and 1 Port 10/100/1000 Base-T (Power/Data) for connection to a PoE Device (PD) Automatic detection of whether the connected device is PoE capable   With the ALLNET ALL048900V2 High Power PoE Injector you install your PoE-enabled IP devices such as wireless access points, VoIP phones and much more totally independent of existing electrical outlets.   So you can choose the best locations for example WLAN access points installations in a building regarding the wireless technology, without having to worry about power cabling.   Non-PoE switches can be efficiently „upgraded“ with Power over Ethernet, especially when you only need a few ports with PoE power supply. Here the ALL048900V2 saves the expensive purchase of a PoE switch.   The ALLNET ALL048900V2 supports the IEEE802.3af standard with a power of 15,4 Watt, the IEEE802.3at high power standard with 30 Watt and the LT PoE with 90 Watt power.   The ALL048900V2 must not be configured. It has an RJ45 jack and an RJ-45 output connector, which are connected to this switch and the end device to the PoE injector. The cable length can here, as usual in Ethernet, up to 100 meters between the switch and terminal in total.   The compact design and the metal case of the ALLNET ALL048900V2 can be very inconspicuous installed and is extremely robust.    Technical Details:   Element Spezification Standards: IEEE802.3af Power over Ethernet IEEE802.3at Power over Ethernet enhancements LT PoE 90W IEEE802.3 10BaseT IEEE802.3u 100BaseTX IEEE802.ab 1000BaseT Ethernet ports: 1x RJ45 10/100/1000Mbps for connection to passive switch or hub 1x RJ45 10/100/1000Mbps for connection to PoE device LED indikators: Power / PoE Act / Status Power input: 44~57V Power consumption:   System: 5W (Max.) LT PoE++: up to 90W   Attached power adapter: Input: 100~240VAC Output: 56VDC/2A, 112W (Max.) Case: Metal case, wall-mountable Dimension: Length/Width/Height: 102 x 75 x 23 mm Weight: 280g (o. Netzteil und Verpackung) Environment: Temperature operating: 0 ~ 40 °C Humidity operating: 10% ~ 90% (non-condensing) Temperature storage: -25 ~ 90 °C  Marks: FCC Class A, CE

5-port 10/100/1000Mbit/s Easy webmanaged Gigabit Ethernet Switch with 4x PoE Outputs (802.3af/at) Highlights: 5-port 10/100/1000Mbit/s Gigabit Ethernet Switch support 4x PoE IEEE802.3af/at) (PoE Budget ca. 60W for max. 4 Devices, support max. 30 per Port IEEE802.3at) Easy Smart-Managed Fanless-Design The new ALLNET ALL-SG8245PM switch is a solid foundation for a networked workplace. With a total of 5 backwards-compatible gigabit ports, computers, printers, access points, etc. Can be integrated in your network reliably. The ALL-SG8245PM can also supply power to PoE-enabled devices via its 4 PoE ports (IEEE802.3af), so they do not need an additional power cable. To ensure the for a workplace very important silent operation, the ALL-SG8245PM is equipped with a fanless design. For optimal usage comfort it is “smart managed”. That means it is among other things configurable for VLAN and QoS.   Technical Details: Switch working: Layer 2-Switch, Web easy smart managed Switch-Typ: standalone Standards: IEEE802.3 10BASE-T IEEE802.3u 100BASE-TX IEEE802.3ab 1000BASE-T IEEE802.3az EEE IEEE802.3ad Link Aggregation IEEE802.1q VLAN IEEE802.1p-based QoS Switching-Ports: 5x RJ45 10/100/1000BaseT(X) 4x PoE IEEE802.3at max. 30W per Port Special: 4x PSE Port for PoE Devices Uplink: yes Full Duplex Mode: yes Buffer Memory: 1Mbits Jumbo Frames: 9216byte  MAC adress table: 2K Filtering/Forwarding: Store-and-Forward LED Define: Power/System: Green LED Off: power off or fail On: power on Blinking: system booting up PoE Alert: Green LED Off: No over PoE max power budget (50W) On: Over PoE max power budget (50W) RJ 45 Port: LINK/ACT: bio-color LED Off: port disconnected or link fail Green on: 1000Mbps connected Amber on: 10/100Mbps connected Blinking: sending or receiving data PoE: Off: PoE power output off Green on: PoE power output on Layer2 Basic:   Port: Auto Negotiation of speed and duplex modes Jumbo frame support Mirror: Port mirroring both on ingress and egress traffic VLAN: 802.1Q VLAN Port-based VLAN LACP: Link Aggregation = IEEE802.3ad Multicast: Blocking of unknown multicast traffic Qos: IEEE802.1p-based QoS Port-based QoS Scheduling Method = WFQ or SP IGMP Snooping: Support IGMPv1 Snooping RFC 1122, RFC4541 Support IGMPv2 Snooping RFC 2236, RFC4541 Support IGMPv3 Snooping(Partial) RFC 3376 Security: STP / Self Loop Support Broadcast Storm Control Support Management: User Interface Web-based Management User Account System password protection PoE: PoE power output On/Off management Power Input: Power-Input: AC to DC external power adapter Input: 100~240V AC Output: 55VDC / 1,3A Housing: Metall/ Desktop PoE Output power capacity: Maximum output :30W per each port 1. Compliant with IEEE802.3af/at standard, Following IEEE802.3at/at to support PoE or PoE+ 2. Automatically discover the connection of PD device and immediately sends power to it 3. Auto disable port if the port current is over 700mA or short happens 4. Priority default setting is lower port NO. has high priority 5. The maximum power used by power devices is defined by the following classification. When Port works in Auto Mode, the output port power limit will be associated with PD classification Value. 6. Follow the standard PSE pin-out standard of Alternative A (MAD-X) which is sending out power over number 1,2,3,6 pins of 8 wires of Ethernet CAT5 UTP cable Dimension: 193 x 84 x 26mm Environment: Operating Temperature: 0 ~ 50 °C Operating Humidity: 10% ~ 90% (non condensing) Storage Temperature: -40 ~ 70 °C Operating Humidity: 5% ~ 90% (con condensing) Marks: CE FCC EMI class B, ROHS    

ALLNET removable screw set M3 and M4 screw set for mounting on Vesa bracket   Diameter/thread length: 4xM3 3.5mm 4xM3 5.5mm 4xM4 3.5mm 4xM4 5.5mm Washers are recommended for some tablets, n.i. scope of delivery

Height-adjustable stand with cable feed-through and rotatable Vesa plate (90-180degrees), floor mounting possible 75mm x 75mm 100mm x 100mm For monitors from 8 to 24 inches. COLOR: black max. height 1200mm min. height 690mm Beschreibung Universal-Tablet-Ständer   Innenkarton 1pc/ctn Tragfähigkeit 20lbs 81x42x12cm,9.6kg Material SPCC Äußerer Karton 2pc/ctn Höhe 70-120cm 81x43x26cm,20.9kg Standard VESA 75 x75, 100 x100mm Brown box Merkmale Kippbereich: 180 Grad Schwenkbereich: 360 Grad Farbe Black/White     Verpackung Karton/braun

Height-adjustable stand with cable feed-through and rotatable Vesa plate (90-180degrees), floor mounting possible 75mm x 75mm 100mm x 100mm For monitors from 8 to 24 inches. COLOR: black max. height 1200mm min. height 690mm Beschreibung Universal-Tablet-Ständer   Innenkarton 1pc/ctn Tragfähigkeit 20lbs 81x42x12cm,9.6kg Material SPCC Äußerer Karton 2pc/ctn Höhe 70-120cm 81x43x26cm,20.9kg Standard VESA 75 x75, 100 x100mm Brown box Merkmale Kippbereich: 180 Grad Schwenkbereich: 360 Grad Farbe Black/White     Verpackung Karton/braun

Vesa auf Vesa Halterung. Mit dieser Halterung ist es möglich einen Mini-PC an einer belegten Vesa Halterung anzubauen. z.B. (div. Ilyama Monitore) 50mm x 50mm, 75mm x 75mm, 100mm x 100mm

Desktop stand, POS holder for tablet PC with Vesa mount Universal desktop holder for two sizes 75x75 and 100x100 Fits displays with Vesa mounting option. Can also be used as a wall mount. To prevent larger tablets from wobbling during active touch input, the edge of the device should be placed on the table. Without screws or mounting accessories for monitors. Screw set art. no.: 157678  Suitable for ALLNET displays: M3x4mm for 10 inch PoE displays M4x4mm for 14/15/21 inch displays

Desktop stand, POS mount for tablet PC with Vesa bracket. Universal desktop mount for two sizes 75x75 and 100x100. Fits displays with Vesa mounting option. Can also be used as a wall mount. No screws included.

For installation in a flush-mounted box deep flush-mounted boxes are recommended, it should be placed behind a switch, etc.. The innovative power supply with wide range input of 90-264 V/AC and stabilized output voltage in the power class 30 W. The devices are suitable for installation in DIN flush-mounted boxes and furniture or for mounting on flat surfaces with unknown flammability. With an overall height of only 33.5 mm, there is even room for installation of the consumer in the flush-mounted box. Power: 30W / max. 3A Input: 90-264V AC Input: stranded wire / double insulated wire / solder pins / spring terminals Output:12V DC, 24V DC (intermediate voltage on request) Output cable: stranded wire / solder pins / spring terminals Operating temperature: -20 to 70°C Efficiency: Efficiency mark Level VI MTBF: 560.000 h at 25° Environmental: IP68 Applications: Audio/Video + IT/KT (EN 62368-1) IT/Commercial (EN 60950-1) household / smart home (EN 60335-1) LED (EN 61347-2-13) medical (EN 60601-1 2xMOPP)

Set besteht aus 2 Kabelpeitschen mit Buchse auf Lan/Ethernet Kabel mit jeweils einmal DC/Hohlstecker Buchse und einmal Stecker 5.5mm / 2,1mm. Passives PoE, kein echtes PoE - Stromquelle muss auf Gerät ausgelegt sein und das Gerät muss einen Hohlstecker als Strom-Eingang haben.

Kabeltyp USB 3.2(geschirmt, PVC mit Baumwollgeflecht) Kategorie 20G/5A, 240W, E-Marker Chip, Gen 2x2 Anschluss Seite A Typ C(Stecker) Anschluss Seite B Typ C(Stecker) Kabellänge 3 m Kabelfarbe Schwarz Besonderheit Kabel in Synergy21 Blisterverpackung

Kabeltyp USB 4.0(geschirmt, PVC mit Baumwollgeflecht) Kategorie 40G/5A, 240W, E-Marker Chip, Gen 3x2 Anschluss Seite A Typ C(Stecker) Anschluss Seite B Typ C(Stecker) Kabellänge 1,5 m Kabelfarbe Schwarz Besonderheit Kabel in Synergy21 Blisterverpackung -Backwards compatible to USB3.2, USB2.0 -Supports Ultra HD 8K 8@60Hz Resolution -Support Power Delivery fast charging max.240W(48V/5A) -Function: charging, data transmission and video output -Thunderbolt 3 Compatible

Kabeltyp USB 4.0(geschirmt, PVC mit Baumwollgeflecht) Kategorie 40G/5A, 240W, E-Marker Chip, Gen 3x2 Anschluss Seite A Typ C(Stecker) Anschluss Seite B Typ C(Stecker) Kabellänge 2 m Kabelfarbe Schwarz Besonderheit Kabel in Synergy21 Blisterverpackung -Backwards compatible to USB3.2, USB2.0 -Supports Ultra HD 8K 8@60Hz Resolution -Support Power Delivery fast charging max.240W(48V/5A) -Function: charging, data transmission and video output -Thunderbolt 3 Compatible

Kabeltyp USB3.2(geschirmt, PVC mit Baumwollgeflecht) Kategorie AWG28 Anschluss Seite A Typ C(Stecker) Anschluss Seite B RJ45(Stecker) Kabellänge 2 m Kabelfarbe Schwarz Besonderheit Kabel in Synergy21 Blisterverpackung Außendurchmesser 4,8mm Netzwerkgeschwindigkeit 10/100/1000Mbps

Kabeltyp USB3.2(geschirmt, PVC mit Baumwollgeflecht) Kategorie AWG28 Anschluss Seite A Typ C(Stecker) Anschluss Seite B RJ45(Stecker) Kabellänge 3 m Kabelfarbe Schwarz Besonderheit Kabel in Synergy21 Blisterverpackung Außendurchmesser 4,8mm Netzwerkgeschwindigkeit 10/100/1000Mbps