Broadband

Highlights: Bridge-Modem compliant tor ADSL/ADSL2/ADSL2+ Annex B & J and VDSL2-Connections High Speed: Max. 100Mbps Downstream and 50Mbps Upstream Vectoring compatible Interoperable with all major DSLAM equipments QoS-Quality of Service Default-Config = Bridge-Modem, changable over WebGUI into Modem-Router The ALLNET ALL-BM200VDSL2V is a ADSL & VDSL2 bridge modem, which allows you access to the VDSL2 Internet quick and easy. The modem is easily connected to a broadband router, firewall PC or MAC, no further adjustments are necessary. The LAN port / terminal only needs to your router / firewall / PC etc. are connected. Technical Details: Element Spezifications Chipset Broadcom BCM63381+BCM6303 4MB Flash & 32MB RAM Operation Mode ADSL Modem / VDSL2 Modem or ADSL/VDSL Router WAN Connection Type Bridge (Default), DHCP-Client, Static-IP, PPPoE, PPPoA, IPoA Physical Interface IEEE 802.3 10Base-T, 802.3u 100Base-TX 1x RJ-45 10/100Mbps 1x RJ-11 DSL-Port Reset Button (Factory Reset) ON/OFF Switcher Standards Full-rate ANSI T1.413 issue 2 ITU-T G.992.1 (G.dmt), supporting Annex B ITU -TG.992.2 (G.lite), supporting Annex B ITU-T G.992.3 (G. dmt.bis), supporting Annex B, Annex J ITU-T G.992.4 (G.lite.bis), supporting Annex B ITU-T G.992.5 (ADSL2+), supporting Annex and Annex J ITU-T G.993.1 (VDSL) ITU-T G.993.2(VDSL2) (Profile 8a, 8b, 8c, 8d, 12a,12b,17a) ITU-T G.994.1 (G.hs) Indicators Power, LAN, DSL & INET Features - Supports G.993.5 Vectoring - Interoperable with major VDSL2 chipsets - Supports up to VDSL2 profile 30a - Supports up to 100 Mbps symmetric - Port Based VLAN & 802.1q VLAN tagging - Configuration backup and restoration over internal WEG-GUI. - Supports Bridge or Router mode (Default Config = Bridge) Power DC 12V / 500mA Dimensions 145 x 105 x 35 mm Temperature 0~40° C (Operating), -30 ~60° C (Storage) Humidity 10 - 90% non-condensing Marks CE, RoHS Compliant    

VDSL2 Master Modem for leased lines via 2-wire connections up to a length of max. 2200 meters and a bandwidth of 100 Mbit/s (depending on length)   Highlights: VDSL CO master modem according to VDSL2 standard for high data throughput Integrated 4-port Ethernet 10/100Mbps switch Two RJ11 sockets for telephone/line connection Integrated DSL splitter and overvoltage protection Various VDSL bandwidth profiles configurable Configuration via web browser (HTTP/HTTPS) Energy-saving, low power consumption (only approx. 5.5W) VDSL technology from metanoia to 100Mbps/symm. Can be used for pure point-to-point connection in connection with a slave CPE modem e.g. ALL126AS3 Network connection via twisted two-wire telephone cable Parallel telephony connection for analogue telephone on the same line possible The ALLNET ALL126AM3 VDSL Master Modem can be used in conjunction with the ALL126AS2 VDSL Slave Modem to create leased lines over a simple 2-wire copper line with a length of up to 2.5 kilometers. Bandwidths of up to 100 Mbps are possible at short distances. At the same time, analog telephones can be connected and operated via the same line. Existing telephone cabling can thus also be used for high-performance data services. Especially for outbuildings / hotels / hospitals, this technology is the optimal solution to provide cost-effective, high-performance network applications via 2 twisted-pair cables with minimum effort. Technical Details: Element Spezifikation Chipsets: Metanoia VDSL MT-5311 ARM Cortex A9 Standards: IEEE802.3 standard IEEE802.3u standard ITU-T G993.2 VDSL2 standard Pysical Interface: Complies with ITU-T G993.2 Connector: RJ-11 On board POTS/ISDN splitter On board surge protection Max. Bandwidth: Symetric 100 Mbps max. 300m LED-Indicators: LAN: Act/Link, Power; VDSL2: Link IP Adress QoS: - IPv4/IPv6 - 8 queue - MFC / DSCP - 802.1P VLAN priority Features: - Adopts ARM Cortex A9 dual-core processor - support http/ https web management - Support CO side bridge mode - Support 8 bands selectable - Support USB 2.0 for Dongle device - Support G.998.4 G.INP - On board surge protection for Line port - Support 8 queue MFC/ DSCP both type - Support SSL/ SSH Security - Support IPV4/ IPV6 address - Support configuration backup and restore - Support Dual Firmware Image Backup - Support TR-069 - VLAN Tag pass through - Mac Address based filtering Power-Consumption: 5.52W Temperature: Temperature Operating: 0°C ~ 50°C (32°F ~ 122°F) Temperature  Storge: -20°C ~ 70°C (-4°F ~ 150°F) Humidity: 10 to 90% (non-condensing) Dimmensions: 184 x 146 x 40 mm (7.2" x 5.74" x 1.57") Marks: CE Package Content: - ALL126AM3 VDSL Master Modem - 12V 1A Powersupply - 1 Patchcable LAN - 1 RJ11 Telefon cable

VDSL2 Master Modem for dedicated lines via 2-wire connections up to a lenght of 2500 Meters and a bandwidth of 100 Mbit/s (depends on length). Supports DPBO (Downstream Power Back Off).   Advantage, in contrast to previous VDSL modems (ALL126AS/ALL126AS2): Automatically detects the operation mode - either slave modem at the ALLNET master or as VDSL modem at the provider (Deutsche Telekom, etc.) The ALLNET ALL126AS3 is a VDSL2 Router that leverages the extraordinary bandwidth promise of VDSL2 (max. 100Mbps Symmetric) technology, the next step in the delivery of new high-speed Internet applications to end-users in their homes or offices.Quick, easy and economical to install and maintain, the ALL126AM2 works with the ALL126AS3 over existing copper wire infrastructure. ALL126AM2 is a CO (Central Office) device while ALL126AS3 is a CPE (Customer Premise Equipment) device.   The ALLNET ALL126AS3 will allow operators worldwide to compete with cable and satellite operators by offering services such as HDTV, VOD, videoconferencing, high speed Internet access and advanced voice services including VoIP, over a standard copper telephone cable.ALLNET ALL126Ax series is seen by many operators as an ideal accompaniment to a FTTP rollout, where for instance fiber is supplied direct to an apartment block and from there copper cable is used to supply residents with high-speed VDSL2.     Product Features:VDSL2 standard for high data throughputIntegrated 4-Port Ethernet 10/100Mbps SwitchTwo RJ11 ports for phone/line Integrated DSL-splitter and surge protection Flexible VDSL bandplan-profiles Automatic speed adjustment for VDSL2-PortConfiguration via webbrowser and/or RS232C console portEnergy saving, low power consumption (only about 6.7W)Advanced VDSL technology from Infineon® for up to 100 Mbps/symm.Diagnostic function for line quality Private point-to-point-operation or public DSL-provider-connection Connection via twisted 2-wire-phonecable Simultaneous telephony for analog or UK0 (ISDN) on the same wireBracket for wall mountingTechnical Details: Element Specification Chipsets: Lantiq VRX Standards: IEEE802.3/802.3u/802.3z standards ITU-T G992.1/G992.3/G992.5/G993.1/G997.1/G993.2 standards Interfaces: 4x RJ-45 10/100/1000Mbps Ethernet port 1x RJ-11/Terminal Block connector for VDSL2 line port 1x RJ-11 connector for POTS/ISDN device 1x Console port (RS232C/115200bps) Band Profile: 8a, 8b, 8c, 8d, 12a, 12b, 17a, 17b, 30a Band Plans: 997, 998 Max. Bandwidth: Symmetric 100 Mbps/300m LED indicators: Power LED 4x Link/Active Status for Ethernet port Link LED for VDSL2 Port Switch method: Store and forward Management and Features: - supports ATM and PTM transmission mode auto detection(ADSL Annex B backward compatible) - supports ATM-TC,ATM and AAL5 (ATM Flow Throughput / OAM Cell Filter and Forwarding / AAL5 SAR:PVC / ATM Traffic Class / ATM PVC Shaping / ATM PVC Scheduling) - supports ATM Total Upstream Priority Queues - supports IPv4/IPv6 - supports Multicast IP table/IGMP v3 Proxy and Snooping - supports IEEE 802.1p VLAN Priority and mapping to DSCP - supports HTTP/HTTPS(SSL) web management - supports remote management and monitor - supports configuration backup and restore - supports 8 queue MFC/DSCP both type QoS - supports IEEE 802.1p VLAN Priority and mapping to DSCP - Provides surge protection for Line port Console port: RS-232C/115200bps Flow control: Full duplex: IEEE 802.3x Half duplex: Back pressure Power consumption: 6.7W Input Voltage: 12 VDC Environment: Temperature operating: 0°C ~ 50°C (32°F ~ 122°F) Temperature storage: -20°C ~ 70°C (-4°F ~ 150°F) Humidity: 10 to 90% (non-condensing) Dimensions: Widht/Height/Depth: 183 x 36 x 145 mm Weight: 385g (without power supply) Mark: CE Package contents: - ALL126AS3 VDSL Slave Modem - 1 Power plug 12V/1A - 1 CD with manual (english) - 1 Patch cable LAN - 1 Patch cable phone (Western connector)

VDSL2 Pair of Modems for dedicated lines via 2-wire connections up to a length of 2.5km and a bandwidth of max. 100 Mbps   HIGHLIGHTS VDSL2 standard for high data throughput Integrated 4-Port Ethernet 10/100Mbps Switch Two RJ11 ports for phone/line Integrated DSL-splitter and surge protection Flexible VDSL bandplan-profiles Automatic speed adjustment for VDSL2-Port Configuration via webbrowser and/or RS232C console port Configurable as router or switch Energy saving, low power consumption (only about 6.9W) Advanced VDSL technology from Infineon® for up to 100 Mbps/symm. Diagnostic function for line quality Private point-to-point-operation or public DSL-provider-connection Connection via twisted 2-wire-phonecable Simultaneous telephony for analog or UK0 (ISDN) on the same wire Bracket for wall mounting Via the ALLNET ALL126AM2 VDSL master modem in conjunction with the ALLNET ALL126AS3 VDSL slave modem dedicated lines can be realized by a simple 2-wire copper cable with a length of up to 5 kilometers. For short distances bandwidths of up to 100 Mbps are possible.At the same time analog telephones can be connected and operated on the same line. An existing telephone wiring can thus also be used for data services with high performance.Specially designed for hotels and hospitals, this technology represents the optimal solution cost, to provide performant network applications with minimal effort.   Technical Details: Element Specification Chipsets: Lantiq MIPS ADM5120P Lantiq VINAX Standards: IEEE802.3/802.3u standardsITU-T G993.2 VDSL2 standard Interface: 4x RJ-45 10/100Mbps Auto-Negotiation RJ-45 Ethernet port 1x RJ-11/Terminal Block connector for VDSL2 line port 1x RJ-11 connector for POTS/ISDN device Band Profile: 8a, 8b, 8c, 8d, 12a, 12b, 17a, 17b, 30a Band Plans: 997, 998 Max. Bandwidth: Symmetric 100 Mbps/300m LED-Indication: Power LED 4x Link/Active Status for Ethernet Port Link LED for VDSL2 Port Switch method: Store and forward Management and Features: - Provides POTS/ISDN Splitter on board- Supports Downstream Power Back-Off (DPBO)- Supports auto speed for VDSL2 port- Supports Web management (HTTP), TFTP, Console (RS232)- Supports uPnP/PPPoE/NAT/DHCP/DMZ/Firewall- Supports Router & Switch (Bridge) mode- Supports Loop back test- Supports SNR indicator for check phone wiring quality- Supports Interleave delay for Data Error & Noise Against- Provides surge protection for VDSL2 port Console Port: RS-232C/115200bps Flow control: Full duplex: IEEE 802.3x Half duplex: Back pressure Power Consumption: 5.52W - 6.12W Environment: Temperatur Operating: 0°C ~ 50°C (32°F ~ 122°F)Temperatur Storage: -20°C ~ 70°C (-4°F ~ 150°F)Humidity: 10 to 90% (non-condensing) Dimensions: Width/Height/Depth: 183 x 36 x 145 mm (7.2“ x 5.74“ x 1.57“)Weight: 0,385kg (without power supply) Mark: CE Package contents: - ALL126AM2 VDSL Master Modem- ALL126AS3 VDSL Slave Modem - each Power Supply 12V/1A- each CD with manual (english)- each 1 Patch cable LAN & each 1 Patch cable phone (Western connector)

G.Fast  modem pair for leased lines over 2-wire connections up to a maximum length of 500 metres and a maximum bandwidth of 1 gig (depending on length) Bundle consists of:   ALL-BM310 (master) and ALL-BM300 (slave) Expected transmission speed In general, the shorter the copper cable, the higher the signal quality that arrives at the subscriber connection and the higher the speed that is possible. Highlights: Master and slave modem according to G.Fast standard for high data throughput Up to 1.5 gig data throughput Supports G.fast 212a profiles Supports high bandwidth up to 1.5 Gbps (UP/DOWN combined) Support SSH/SSL Security Splitter for analogue phone on board RJ-11/Terminal block combo for line port 4x RJ-45 10/100/1000Mbps ports 1x RJ-11 for G.Fast 1x RJ-11 terminal block &p>The ALLNET BM-310 G.Fast master modem can be used in conjunction with the ALLNET ALL-BM300 G-Fast slave modem to realise leased lines over a simple 2-wire copper cable with a length of up to 500m. Bandwidths of up to 1.5 gig/s are possible over short distances (approx. 200 metres). This technology is the ideal solution for providing high-performance network applications with high data rates at low cost and with minimal effort, especially for demanding retrofits in existing IT systems. Another large field of application is buildings that do not yet have any LAN cabling and that cannot be implemented due to the existing building fabric. Power supply unit is included in the scope of delivery!

ALLNET ISP Bridge Modem g.fast with supervision / point-to-point modem VDSL g.fast via 2-wire managed slave "ALL-BM300 Highlight: Universal VDSL2 & G.Fast Bridge Modem Supports VDS2 / VDSL2 Vectoring (100Mbit) and Super-Vectoring 35b (250Mbit DeutscheTelekom connections) Supports g.fast 106MHz and g.fast 212MHz profile Integrated splitter for simultaneous analog telephony and broadband via the 2 wire pair.  In combination with ALL-BM310 bridge master, it can be used as point-to-point g.fast solution.    The ALLNET ALL-BM300 is a multi VDSL2 & G.fast Bridge Modem, which allows you to access the VDSL2 Internet in a fast and easy way. The modem is simply connected to a broadband router, firewall PC or MAC, no further settings are necessary (for VLAN settings a VLAN ID can be configured in the web interface). Only your router/firewall/PC etc. needs to be connected to the LAN port/connection. It is ITU-T compliant and complies with the G.9700/9701 standard and supports the G.fast 106/212 double wave profile. The bandwidth is up to 1 Gbps symmetrical data transmission and is perfectly suited for FTTpd/FTTN applications. The ALL-BM300 is a cost-effective solution that provides end users with high-speed Internet access over existing copper wire infrastructure. ALL-BM300 is also backward compatible with VDSL2 Super-Vectoring Profile 35b and VDSL2 Profile 17A.  Technical Details: Features: Compliant with IEEE 802.3 / 802.3u / 802.3ab Ethernet Standard Compliant with ITU-T G993.2 VDSL2 standard (ALL-BM300 only) Compliant with ITU-T G998.4 G.INP standard (ALL-BM300 only) Compliant with ITU-T G.9700/G.9701 G.fast standard Backward compatible VDSL2/V35b (ALL-BM300 only) Support 106a/ & 212a/ dual G.fast band profile Support super Vectoring for V35b / G.fas(ALL-BM300 only) Support Vectoring for VDSL2(ALL-BM300 only) Support High Bandwidth up to 1Gbps Support USB 3.0 for connecting USB Dongle Support static routing for IPv4 and IPv6 forwarding(ALL-BM300 only) Mac Address based filtering Support 8 queue MFC/DSCP both type QoS Support HTTP/HTTPS web management Support SSL security Support remote management and monitor Support configuration backup and restore On board surge protection for Line port Support bridge(switch) / Router mode(ALL-BM310 Master only) Support RJ-11 / Terminal block combo line port Support NTP Time Server. Support TR-069. On board POTS/ISDN splitter Support Jumbo frame(MTU) up to 1600 bytes  Specifications   Standards IEEE802.3/802.3u/802.3ab standards ITU-T G9700/G9701 standards ITU-T G993.2/G998.4 standards (ALL-BM300 only) Physical Interface 4 x RJ-45 10/100/1000 Mbps Ethernet port 1 x RJ-11 / Terminal block combo for line port 1 x RJ-11 connector for POTS/ISDN phone device 1 x Reset Button for resetting to factory default 2 x USB3.0 for connecting USB dongle Button 1 x Power LED 4 x Link/Active Status for Ethernet port 1 x Link LED for G.fast mode 1 x Link LED for xDSL mode  Routing (ALL-BM300 only)  IP Multicast, IGMP Proxy, Snooping Static Routing IPv4, IPv6 forwarding DHCP Server/Relay/Client IPv4/IPv6 DNS Proxy and Relay, NTP Client Firewall  IPv6 Firewall Packet, URL filtering Parental Control, DMZ Host Input Power DC 12V / 2A including Dimensions:  196mm x 146mm x 40 mm ( 7.72" x 5.75" x 1.57”) Net weight: approx. 0.4 kg Temperature 0°~50° C (Operating), -20° ~70° C (Storage) Humidity  10 - 90% non-condensing Marks CE FCC RoHS Compliant Package Contents: 1x ALL-BM300 1x 12V/2A Powersupply 1x Patchcale 1x QIG

Hightlights: Upgrade Any Ethernet Gateway to GPON — Instantly The ALL-BM510-GPON-GBIC transforms any SFP-based router, switch, or gateway into a full GPON ONT, enabling rapid fiber rollout without hardware replacement. Compact SFP ONT with High-Performance GPON A complete ITU-T G.984-compliant GPON ONT packed into a miniature SFP form factor—optimized for business and residential fiber deployments. Seamless Integration via HSGMII (2.5G/1G) Plug-and-play SFP with HSGMII interface for effortless compatibility with existing Ethernet infrastructures. Carrier-Grade QoS and Advanced L2 Features Full VLAN functionality, QoS mapping, traffic classification, and advanced bridging deliver premium service quality for demanding fiber applications. Ultra-Low Power Consumption Consumes less than 1.6W, ideal for high-density deployments. Wide Temperature Operation Reliable performance from –10°C to +85°C, designed for harsh environments and telecom cabinets. Secure and Fully Managed Integrated OMCI stack for remote provisioning, monitoring, firmware upgrades, and FCAPS management. High Optical Performance ProdSupports Class B+ optics with APD receiver and DFB transmitter for long-reach, stable GPON connectivity. To extend the GPON deployment in existing access network for business and residential subscribers, GPON ONT SFP ALL-BM510-GPON-GBIC provides the standard SFP package with SGMII interface, which can easily replace the Ethernet SFP module existing in Ethernet gateway, switch, router or backhaul equipment etc. Equipped with ITU-T G.984 compliant GPON interface, ALL-BM510-GPON-GBIC incorporates interoperability, key customers’ specific requirements and cost-efficiency. By integrating GPON MAC and standard compliant OMCI stack, G- 97S provides all GPON functionality and full range FCAPS management features including supervision, monitoring and maintenance Service Data The ALL-BM510-GPON-GBIC ONT is delivered with one SFP (Small Form-factor Pluggable) based HSGMII interface, supporting: Built-in layer-2 switching Advanced data features such as VLAN tag manipulation, classification, and filtering Specification Dimensions 72 mm x 14 mm x 11.8 mm (L x W x D) Power Supply Full Speed Power Consumption at room temperature: < 1.6W Working Environment case operating temperature: -10~+85 °C Humidity: 5 ~ 95% relative humidity, non- condensed Safety & EMI CE compliant FCC/UL compliant Installation SFP interface GPON Interface Compliant with ITU-T G.984 GPON standards SFF type laser, SC/APC connector 1.244G bps Burst Mode Upstream Transmitter 2.488 Gbps Downstream Receiver Compliant with ITU-T G.984.2 Amd1, Class B+ APD receiver and DFB transmitter 0.5~+5dBm launch power, -27 dBm sensitivity, and -8dBm overload Wavelengths: US 1310nm, DS 1490nm Laser compliant with FCC 47 CFR Part 15, Class B, and FDA 21 CFR 1040.10 and 1040.11, Class I, ONT support Class C or Class C+ optics as an option GPON QoS Multiple T-CONTs per device Multiple GEM Ports per device Flexible mapping between GEM Ports and T- CONT Activation with automatic discovered SN and password in conformance with ITU-T G.984.3 AES-128 Decryption with key generation and switching FEC (Forward Error Correction) DBA reporting by piggyback reports in the DBRu (mode 0) 802.1p mapper service profile on U/S Mapping of GEM Ports into a T-CONT with priority queues based scheduling Support Multicast GEM port and incident broadcast GEM port. Ethernet Interface SFP based HSGMII interface, 2.5GE/1GE compatible Hardware priority queues on the downstream direction in support of CoS 802.1D bridging Virtual switch based on 802.1q VLAN VLAN tagging/detagging VLAN stacking (Q-in-Q) and VLAN Translation IP ToS/DSCP to 802.1p mapping Class of Service based on VLAN-ID, 802.1p bit, ToS/DSCP Marking/remarking of 802.1p Broadcast/Multicast rate limiting OAM Standard compliant OMCI (the embedded operations channel) interface as defined by ITU-T G.984.4 and G.988 Alarming and AVC report, performance monitoring Remotely software image download over OMCI, as well as activation and rebooting Hold two software sets with software image integrity checking and automatic rollback Pin Description: PINNO. Name Active 1 VEET   2 TX Fault High 3 TX Disable High 4 SDA   5 SCL   6 MOD_ABS   7 Dying Gasp Up to host pin definition 8 RX_LOS High 9 VEER   10 VEET   11 VEER   12 RD-   13 RD+   14 VEER   15 VCCR   16 VCCT   17 VEET   18 TD+   19 TD-   20 VEET  

VDSL2 Plug and Play Bridge Modem for provider VDSL connections such as Telekom, Vodafone, QSC etc. or as a CPE modem for DSLAM installations in hotels or hospitality environments Highlights: Bridge modem according to VDSL2 standard for high data throughput Automatic speed setting for VDSL2 port Future-proof VDSL2 technology up to 250Mbps with vectoring & supervectoring VDSL2 & VDSL Supervectoring compatible Vectoring 100Mbit connections & Supervectoring 250Mbit connections 35b compatible 2x LAN ports for DSLAM applications (thus no extra switch is required in the hospitality environment) The ALLNET ALL-BM2100VDSL2V is a VDSL2 bridge modem that gives you quick and easy access to the VDSL2 Internet. The modem is simply connected to a broadband router, firewall PC or MAC. Further settings such as VLAN IDs may need to be made in the web interface. Only your router/firewall/PC etc. needs to be connected to the LAN port/connection. The modem has 2 LAN ports and is the ideal counterpart when DSLAMs and hospitality solutions are offered. This means DSLAM and 2-wire technology in the hospital room / hotel room etc.. This means that a second switch is not required in the hotel room/hospital room. ADSL2/VDSL2 Installation: Technical details:   Element Specification Chip set: Broadcom BCM63178 Physical Interface: IEEE 802.3 10Base-T, 802.3u 100Base-TX 2x RJ-45 10/100/1000Mbps LAN Reset button (factory reset) Standards: VDSL2 ITU-T G.993.2(G.vdsl2) (Profiles 8a, 8b, 8c, 8d, 12a,12b,17a) ITU-T G.993.5 Vectoring (Profile 30a & Profile 35) ITU-T G.994.1 (G.hs) and G.993.1 VDSL ITU-T G.993.2 Annex Q Indicators: Power,LAN1/2,DSL,INET Features: - Supports G.993.5 vectoring - Interoperable with major VDSL2 chipsets - Supports up to VDSL2 profie 30a - Supports up to 250 Mbps symmetric - 802.1q VLAN tagging - Configuration - TR69: Manage settings and updates remotely from any end equipment - Default: off Power: DC 12V / 0.5A Dimensions: 106mm x 171mm x 37mm  Temperature: 0~40° C (Operating), -30 ~60° C (Storage) Humidity: 10 - 90% non-condensing Marks: CE, RoHS Compliant

Optional Wall Mount with Anti-Theft Feature for the ALL-BM210 Would you like to mount your ALL-BM210 on the wall without the hassle of complicated drilling templates or measurements? We have the perfect solution for you – our optional wall mounting bracket with 2 bolts. This innovative bracket allows you to securely and effortlessly mount your ALL-BM210 device with the ports facing either upward or downward. The installation is remarkably simple: Just attach the mounting plate to the wall and hang your device – and you're done! Important Note – Integrated Theft Protection: We've carefully considered how to protect your ALL-BM210 device from theft. Our solution is straightforward yet effective. The wall bracket features two tabs that can be slightly bent for active theft protection. This ensures that the device securely locks into the original wall bracket holes on the ALL-BM210 during installation, as shown in the image below. If you need to remove your device from the wall bracket, it can be done effortlessly with a thin screwdriver. Gently bend the metal tabs away, and the device can be snapped out of the bracket. With our optional wall mounting bracket, you can not only conveniently and securely install your ALL-BM210 but also protect it from theft – ensuring maximum security and convenience.

Optional wall mount with multiple mounting options such as directly to a flush mount box to standard 2 screw mounting. Resourceful integrators will discover the optional holes for possible theft protection (screws/dowels must be provided by the integrator/installer). Aluminum / White painted. (Images are from 3D printed sample)

Highlight: Industrial VDSL2V bridge modem made of metal with integrated 4-port 10/100/1000 Mbps switch. Hat rail mountable Supports DPBO (Downstream Power Back Off). Can be configured as a VDSL2 modem for Telekom VDSL2 connection and then requires a suitable downstream router. Supports VDSL vectoring. Wall mounting possible Redundant power supply is also possible. Can also be used as a point-to-point client in conjunction with ALL126AM3 master    Temperature range -20 degrees to +70 degrees. The power supply is possible from 12V to 48V DC via terminal contacts. ALL-BMI100VDSL2V is an industrial VDSL2 bridge modem equipped with four Gigabit LAN ports. It is compliant with the ITU-T G.993.2 and G.993.5 standards and supports the VDSL2 profile 30a & , which offers 100 Mbps of symmetrical data. ALL-BMI100VDSL2V is perfectly suited for triple play applications. Of course, it also supports the other profiles such as 17a / 8 etc. This can be configured via the integrated web interface. The modem is housed in a modern metal housing for DIN rail mounting and is suitable for harsh environments, such as industrial networks and applications in harsh environments (IP30). Support of the vectoring technology Friendly Mode Vectoring is a transmission method that uses the coordination of line signals to reduce crosstalk and improve performance. It is based on the concept of noise suppression, similar to headphones with noise suppression. The ITU-T G.993.5 standard, "Self-FEXT cancellation (Vectoring) for use with VDSL2 transceivers" (2010), also known as G.vector, describes vectoring for VDSL2. The scope of the ITU-T G.993.5 recommendation is specifically limited to self-FEXT suppression (far-end crosstalk) in the downstream and upstream directions. Far-end crosstalk (FEXT) generated by a group of short-range transceivers and interfering with the long-range transceivers of the same group is cancelled. This cancellation takes place between VDSL2 transceivers that do not necessarily have to have the same profile. Easy installation The ALL-BMI100VDSL2V can be installed on any flat surface (e.g. table, shelf or rail) with a bracket or on the DIN rail. The ALL-BMI100VDSL2V supports plug-and-play installation and is fully compatible with all types of network protocols. In addition, the user can monitor the status of each individual port via the LED indicators. Advanced management For efficient management, the ALL-BMI100VDSL2V can be programmed via the web interface for advanced management functions such as VLAN configuration through to changing synchronisation profiles, etc. About applications in harsh environments The ALL-BMI100VDSL2V can be used in harsh environments, such as -20°C ~ 70°C (-4°F ~ 158°F), and has a metal housing that complies with the IP-30 design. The ALL-BMI100VDSL2V can be used in harsh environments, such as -20°C ~ 70°C (-4°F ~ 158°F), and has a metal housing that complies with the IP-30 design. Technical details: Element Specification Chip set: Lantiq Vinax VRX268 (VDSL2) + VRX208 Physical interface: 4 x RJ-45 10/100/1000Mbps auto-negotiation Ethernet port 1 x RJ-11/Terminal Block connector for VDSL2 line port 1 x removable 6-contact terminal blocks for power1 and alarm contact 1 x removable 2-contact terminal blocks for power2 1 x reset button (factory reset) MTU: 1680 bytes (Jumbo frame) VDSL2 interface: Complies with ITU-T G993.2, G993.5 Connector: RJ-11/Terminal block PTM/ATM Transmission On-board surge protection LED Indicators: 1 x Power LED 4 x Link/Active Status for Ethernet port 1 x Link LED for VDSL2 port Features: Supports ITU-T G.993.5 vectoring Supports ATM and PTM transmission mode auto detection( ADSL Annex A/B backward compatible) Supports high bandwidth up to 100Mbps symmetric over line ports Supports 8a, 8b, 8c, 8d, 12a, 12b, 17a, 17b, and 30a band profile and 997, 998 band plan Supports ATM-TC,ATM and AAL5 (ATM Flow Throughput / OAM Cell Filter and Forwarding / AAL5 SAR:PVC / ATM   Traffic Class / ATM PVC Shaping / ATM PVC Scheduling) Supports ATM Total Upstream Priority Queues Supports uPnP/PPPoE/PPPoATM/IPv4/IPv6/NAT/NAPT Supports static routing for IPv4 and IPv6 forwarding Supports firewall functions contains Packet filtering, DMZ, Mac Address ased filtering, Parental Control, Application   based filtering Supports DHCP Server/DHCP Relay/DHCP Client/DHCPv6 Client/DHCPv6 Server/DNS/DNS Proxy or   Relay/DNSv6 Proxy or Relay/NTP Client/HTTP1.1 server Supports Multicast IP table/IGMP v3 Proxy and Snooping Supports IEEE 802.1p VLAN Priority and mapping to DSCP Supports 802.1q VLAN tagging Supports HTTP/HTTPS(SSL) web management Supports remote management and monitor Supports configuration backup and restore Provides surge protection for Line port Supports power redundant and wide range dual power input(DC12V ~ 48V) Supports overload current protection Supports wide range operating temperature(-20 C ~ 70 C) Supports reverse polarity protection Supports alarm contact (relay output - 1 A @ 24 Vdc/@ 120Vac) Supports DIN-Rail mount installation Metal case design and compliant with IP30 standard Supports Router & Switch(Bridged) mode selection Supports jumbo frame up to 1680 bytes Supports 8 queue MFC/DSCP both type QoS Supports dual firmware image backup Supports Dying Gasp Switch method:  Store and forward Flow control: Full duplex: IEEE 802.3x Half duplex: Back pressure Power supply: DC 12V Redundant dual DC input power 12~48V (Removable Terminal Block) Power supply unit is required see accessories Maximum Power Consumption: 9.6W Dimensions: 182mm x 142mm x 35.5mm (7.16" x 5.59 " x 1.39 ") Operationg Temperature: -20°C ~ 70°C (-4°F ~ 158°F) Fanless, free air cooling Storage Temperature: -40°C ~70°C (-40°F ~ 158°F) Humidity: 5 to 95% (non-condensin Net weight: approx. 0.79 kg Marks: CE, FCC, RoHS Compliant Package contents: 1x ALL-BMI100VDSL2V 1x terminal block connectors 1x DIN rail with screws 1x QIG

Hightlights: Cost-effective VDSL2/fiber/Ethernet unmanaged bridge modem Supports VDSL profiles 8a, 8b, 8c, 8d, 12a, 12b, 17a Supports 1000Base-X SFP slot Supports ITU-T G.993.5 vectoring Supports G. INP Supports UPBO & DPBO Supports compact size and DIN rail mounting (optional bracket see accessories) Supports Jumbo Frame (MTU) 2K bytes on VDSL side The ALL-MC116SV-VDLS2 is a cost-effective unmanaged VDSL2 bridge modem. It uses the G.993.2 VDSL2 standard technology for data transmission on only one copper cable pair. Data transmission over only a single copper cable pair. The ALL-MC116SV-VDSL2 is specifically designed to support vectoring for Telcom & ISP to Hospitality solutions for operation on DSLAM's. The modem is therefore compatible with standard VDSL up to 100Mbit VDSL connections. The modem has 2x 10/100/1000Base-T Ethernet ports and an additional 1000Base-X SFP slot offers this extender a flexible solution to extend the LAN network and is perfect for use in buildings, hotels, hospitals or other locations outside the range of 10/100/1000Base-T (Ethernet) or fiber. Especially the vectoring technology distinguishes the ALL-MC116SV-VDSL2 from its brothers that it is designed for vectoring connection to a DSLAM, no matter if it is used for provider ISP or in-house DSLAM later. Important to note it is an unmanaged device. With unmanaged bridge modem you have NO chance to read out the bandwidth or to set VLAN tags etc. Technical Details: Element Spezifikation Standards: IEEE 802.3ab IEEE802.3u IEEE 802.3z Interface: 2x 10/100/100Base-T RJ45 1x 1000Base-X SFP Slot VDSL2 Interface:   Comply with ITUT G993.2 Connector: RJ-11/Terminal block DMT Encoding/PTM Transmission On-board surge protector MTU: 2K Power supply: DC 12V via AC switching adapter (including) Power Consumption: 3W Typical LED-Indicators: LAN E1/E2: Act/Link, SFP port: Link Line: Act/Link, System: PWR   Housing: Metal housing Dimensions: 124 x 93 x 27 mm (4.88" x 3.66" x 1.06") Weight:   Approximately 0.34Kg only the device Environment: 0~50° C (Operating Temperature) -20~70° C (Storage Temperature) 10 - 90% (non-condensing Humidity) Marks: CE, FCC, RoHS Compliant Package contents: 1x ALL-MC116SVDLS2 modem 1x external power supply 1x manual

Hightlights: Cost-effective VDSL2 Ethernet unmanaged bridge modem Supports VDSL profiles 8a, 8b, 8c, 8d, 12a, 12b, 17a Supports 1000Base-X SFP slot Supports ITU-T G.993.5 vectoring Supports G. INP Supports UPBO & DPBO Supports compact size and DIN rail mounting (optional bracket see accessories) 2x Gigabit ports with PoE according to IEEE802.3at max. 30W per port. = Budget 60W Supplied PoE power supply which according to medical certification IEC/EN/UL60601-1 1x MOPP The ALL-MC116SPV-VDLS2 is a cost-effective unmanaged VDSL2 bridge modem with integrated 2x port PoE switch according to IEEE802.3at with max. 30W per PoE port. It uses the G.993.2 VDSL2 standard technology for data transmission on only one copper cable pair. Data transmission over only a single copper cable pair. The ALL-MC116SPV-VDSL2 is specifically designed to support vectoring for Telcom & ISP to hospitality solutions for operation on DSLAM's. The modem is therefore compatible with standard VDSL2 up to 100Mbit VDSL2 connections. The modem has 2x 10/100/1000Base-T Ethernet ports with PoE IEEE802.3at max. 30W per port. PoE budget = 60W. Thus, this extender offers a flexible solution to extend the LAN network and is perfect for use in buildings, hotels, hospitals or other places outside the range of 10/100/1000Base-T (Ethernet). Especially the vectoring technology distinguishes the ALL-MC116SPV-VDSL2 from its brothers that it is designed for vectoring connection to a DSLAM, whether it is used for provider ISP or in-house DSLAM later. Important to note, this is an unmanaged device. With unmanaged bridge modems you have NO chance to read out the bandwidth or set VLAN tags etc.. Of course you can read out the data at your DSLAM as they synronized. The 2x PoE ports according to IEEE802.3at with max. 30W per port are now still ideal to operate PoE devices such as WLAN access points or PoE tablets up to patient monitors or other end devices in the hospital room/hotel room/nursing homes etc. directly on the two ports. Medicine power supply according to IEC60601-1 1x MOPP. Technical Details: Element Spezifikation Standards: IEEE 802.3ab IEEE802.3u IEEE 802.3z Interface: 2x 10/100/100Base-T RJ45 mit IEEE802.3at PoE Port mit max. 30W pro Port = 60W PoE Budget VDSL2 Interface:   Comply with ITUT G993.2 VECTORING Connector: RJ-11/Terminal block DMT Encoding/PTM Transmission On-board surge protector Power supply: DC 54V AC to DC Medial compliant IEC/EN/UL60601-1 1x MOPP switching adapter (including) Power Output: 60W Maximum (each LAN port 30W) LED-Indicators: AN:Act/Link,   PoE,   Overload VDSL2:  Act/Link,  Line  Mode:  CO/CPE Housing: Metal housing Dimensions: 137 x 100 x 27 mm (5.39" x 3.94" x 1.06") Weight:   Approximately 0.42Kg only the device Environment: 0~50° C (Operating Temperature) -20~70° C (Storage Temperature) 10 - 90% (non-condensing Humidity) Marks: CE, FCC, RoHS Compliant Package contents: 1x ALL-MC116SPVDLS2 modem 1x external medial compliant IEC/EN/UL60601-1 1x MOPP power supply 1x manual

Highlight: The ALL-BM410-XGSPON-GBIC ONT is delivered with one SFP+ (Small Form-factor Pluggable) based 10G Base-X Gigabit Ethernet data interface, supporting: Built-in layer-2 switching Advanced data features such as VLAN tag manipulation, classification, and filtering The ALL-BM410XGSPON-GBIC is also certified by Swisscom. To extend the 10GPON deployment in existing access network for business and residential subscribers, XGS PON ONT SFP ALL-BM410-XGSPON-GBIC is a standard SFP+ form factor, which can easily replace the Ethernet SFP+ module existing in Ethernet gateway, switch, router or backhaul equipment etc. The ALL-BM410XGSPON-GBIC is also certified by Swisscom. Equipped with ITU-T G.9807 compliant XGS-PON interface, ALL-BM410-XGSPON-GBIC incorporates interoperability, key customers’ specific requirements and cost-efficiency. By integrating XGS PON MAC and standard compliant OMCI stack, ALL-BM410-XGSPON-GBIC provides all XGS PON functionalities and full range FCAPS management features including supervision, monitoring and maintenance Technical Details: Installation SFP+ Interface PON Interface Compliant with ITU-T G.9807 XGS-PON standards SFF type laser, SC/APC connector 10G bps Burst Mode Upstream Transmitter 10G bps Downstream Receiver Compliant with ITU-T G.9807 Class N1 APD receiver and DFB transmitter 4~+9dBm launch power, -28dBm sensitivity, and -9dBm overload Wavelengths: US 1260nm to 1280nm, DS 1575nm to 1580nm  Laser compliant with FCC 47 CFR Part 15, Class B, and FDA 21 CFR 1040.10 and 1040.11, Class I, ONT support Class C or Class C+ optics as an option PON QoS Multiple T-CONTs per device Multiple GEM Ports per device Flexible mapping between GEM Ports and T- CONT Activation with automatic discovered SN and password in conformance with ITU-T G.984.3 AES-128 Decryption with key generation and switching FEC (Forward Error Correction) DBA reporting by piggyback reports in the DBRu (mode 0) 802.1p mapper service profile on U/S Mapping of GEM Ports into a T-CONT with priority queues based scheduling Support Multicast GEM port and incident broadcast GEM port. Ethernet Interface SFP+ based 10GBase-X GbE interface Hardware priority queues on the downstream direction in support of CoS 802.1D bridging Virtual switch based on 802.1q VLAN VLAN tagging/detagging VLAN stacking (Q-in-Q) and VLAN Translation IP ToS/DSCP to 802.1p mapping Class of Service based on VLAN-ID, 802.1p bit, ToS/DSCP Marking/remarking of 802.1p Broadcast/Multicast rate limiting OAM Standard compliant OMCI (the embedded operations channel) interface as defined by ITU-T G.988 Alarming and AVC report, performance monitoring Remotely software image download over OMCI, as well as activation and rebooting Hold two software sets with software image integrity checking and automatic rollback Power Supply Power Consumption: < 2.8W Dimensions 87.5 mm x 15.6 mm x 13.75 mm (L x W x D) Working Environment case operating temperature: -40~+85 °C Humidity: 5 ~ 95% relative humidity, non- condensed Safety & EMI CE compliant FCC/UL compliant

ALLNET point-to-point modem g.fast via 2-wire managed master "ALL-BM310" Highlight: G.Fast bridge master modem Integrated splitter for simultaneous operation of analogue telephone and g.fast via the same cable Network via 2 twisted wires in combination with ALL-BM300 slave modem (modem is still required separately - please note our ALL-BM320 bundle here. Max. Cable length = 500m, highest expected bandwidth 1GBIT/s  (for more information see below "expected transmission speed" The ALLNET ALL-BM310 is a G.fast master modem which, in combination with an ALL-BM300, can quickly and easily provide you with network & Internet & via 2 twisted-pair cables. The bridge modem is simply connected to a broadband router, firewall PC or MAC, no further settings are necessary. The network is transmitted 1:1 transparently, i.e. VLAN settings of the upstream switch are also passed through. Expected transmission speed In general, the shorter the copper line, the higher the signal quality that arrives at the subscriber connection and the higher the speed that is possible. Technical details: Features: Compliant with IEEE 802.3 / 802.3u / 802.3ab Ethernet Standard Compliant with ITU-T G.9700/G.9701 G.fast standard Support 212a G.fast band profile Support High Bandwidth up to 1Gbps Support USB 3.0 for connecting USB dongle Support HTTP/HTTPS web management Support remote management and monitor Support configuration backup and restore On board surge protection for Line port Support bridge(switch) ALL-BM310 Master only) Support RJ-11 / Terminal block combo line port Support NTP Time Server . Support TR-069. On board POTS analogue telephone splitter Support Jumbo frame(MTU) up to 1600 bytes  Specifications   Standards: IEEE802.3/802.3u/802.3ab standards ITU-T G9700/G9701 standards Interfaces: 4 x RJ-45 10/100/1000 Mbps Ethernet port 1 x RJ-11 / Terminal block combo for line port 1 x RJ-11 connector for POTS analogue phone device 1 x Reset Button for resetting to factory default LED: 1 x Power LED 4 x Link/Active Status for Ethernet port 1 x Link LED for G.fast mode 1 x Link LED for xDSL mode  Input Power DC 12V / 2A Powersupply included Dimensions:  196mm x 146mm x 40 mm ( 7.72" x 5.75" x 1.57”) Temperature 0°~50° C (Operating), -20° ~70° C (Storage) Humidity  10 - 90% non-condensing Marks CE FCC RoHS Compliant Package Contents: 1x ALL-BM310 1x 12V/2A Powersupply included 1x Patchcable 1x RJ11 to RJ11 Cable 1x QIG

Hightlights: VDSL2 modem optionally adjustable as master or slave Simple 2-wire connection for point-to-point connection Up to 160 Mbit/s symmetrical for up to 3km (cable dependent) 2x RJ45 10/100/100Mbps Ethernet ports NEW: 1x 1000Base-X SFP slot for optional SFP modules also available as practical bundle of 2 Optional DIN-Rail Adapter: Art. 102424 Supports jumbo frames (2K bytes MTU) Selectable G. INP mode Selectable 8-band profile With the ALL-MC116VDSL2 modem ALLNET introduces a pure VDSL2 single port bridge to the market, which fulfills the basic requirement of a perfomant point to point connection via 2 wire connection - typically a telephone connection - with all advantages of a VDSL2 connection. The modem has RJ11 jacks as well as terminal jacks for the pure wire connection. The additional possibility to ground the devices (with the ALL95100 lightning protection) brings the necessary protection against lightning strikes in the application area. Two Gigabit ports connect the modem to the network. In the new ALL-MC116VDSL2 is now also an optional Gigabit SFP slot available to expand the communication with copper or Fibre GBIC modules if necessary. The ALL-MC116VDSL2 can be configured quickly and easily as either a master or slave modem via the DIP switch. On the front of the device there are numerous LEDs for visual signaling of the operating states and connections. Technical Details: Element Spezifikation Standards: IEEE 802.3ab IEEE802.3u IEEE 802.3z Interface: 2x 10/100/100Base-T RJ45 1x 1000Base-X SFP Slot VDSL Interface:   Connector: RJ-11/Terminal block DMT Encoding/PTM Transmission On-board surge protector MTU: 2K 4-position DIP Switch   Selectable CO or CPE mode Selectable Band profile Selectable G.INP   Power supply: DC 12V via AC switching adapter (including) Power Consumption: 3W Typical LED-Indicators: LAN: Act/Link, PWR: Power Line: Act/Link, Line Mode: CO/CPE   Housing: Metal housing Dimensions: 124 x 93 x 27 mm (4.88" x 3.66" x 1.06") Weight:   Approximately 0.34Kg only the device Environment: 0~50° C (Operating Temperature) -20~70° C (Storage Temperature) 10 - 90% (non-condensing Humidity) Marks: CE, FCC, RoHS Compliant Package contents: 1x ALL-MC116VDLS2 modem 1x external power supply 1x manual

HUT DIN rail adapter for ALL-MC115VDSL2 & ALL-MC116 series to click on the HUT rail.  

VDSL2 modem pair for leased lines over 2-wire connections up to a length of max. 2500 meters and a bandwidth of max. 100 Mbit/s (depending on length) Bundle consists of 1x master modem ALL126AM3 and 1x slave modem ALL-BMI100VDSL2V Highlights:     Point-to-point distance up to 2.5km     For short distances data rates up to 100Mbit/s possible     Slave modem with extended temperature range (-20°C ~ +70°C) and DIN-rail mounting     Slave modem has the option to be powered with extended current input range with redundant current input.     More info see datasheets of part.149851 & part. 172755

- Bundle consists of 2x Master/Slave Modem ALL-MC116VDSL2 - Point-to-point distance up to 1km - For short distances data rates of up to 100Mbit/s possible - NEW: GBIC slot for optional miniGBICS (fibre / copper / 2-wire etc.) DIP switch 1 must be set to ON "up" for the master and OFF "down" for the slave.

- Bundle consists of 1x ALL-MC116VDSL2 which must be set as master "CO DIP switch + 1x slave modem ALL-MC116SPV which must be set as slave "CPE DIP switch". - Point-to-point distance up to 1km - Data rates of up to 100Mbit/s possible for short distances - NEW: GBIC slot for optional miniGBICS (fibre / copper / 2-wire etc.) DIP switch 1 must be set to ON "top" on the master and OFF "bottom CPE" on the slave

Optional Splitter for ALL-MC115VDSL & ALL-WR0500AC with 1 Cable ca. 140cm length. Dimmension: 60x40x23mm

G.S IAD V35/M34+ETH FRF-5&FRF-8, INT PWR 120-220 VAC

G.S IAD V35/M34+ETH; FRF-5&FRF-8, EXT 120-220 VAC PWR SUPPLY

G.SHDSL IAD w/ETH+E1(RJ45/BNC) -48VDC